Recent content by ferguson

More time than money

i would bleed injector lines. messy job big pan under engine. i would start at the injector pump & then to the injectors. my 2 cents. And 13k is crazy. Worst case need to by a remand injector pump & injectors.

I know i have hearing loss. But i like to hear whats going on running my equipment. Just my 2 cents.

The tooth bar was a bent 60 inch from a skid steer. I bought for 20 bucks and modified for my 72 inch bucket. The ball hitch on pins turns around and locks in out-of-the-way backwards outer hooks and hook plate have quarter inch backers plates because that’s what I had.

Nice

Know what you mean wolf man my bucket 1/2" bow in the cutting edge form previous owner. need rig chain & poster power & fix

Plus one on each side of outer edge of the bucket

Been mowing with a 72" kingkutter side discharge for 20 yrs ( lots of maintenance over the yrs 4th set of hub assemblys & rebuilds. Countless weel bolts & bushinge did switch to solid tires yrs ago. Also Plating & welding of cracks. ) Use my ferguson TO-20 have never had it on my L3130. Use high...

When I got the tractor it had 950 hrs & no history / Filters were not O.E.M. so it had oils changed / I changed every thing at 1000hrs including front axel / used UDT2 / was changing eng. oil so I pulled a little oil from both sides 2 quarts or so did not look at it untill after I finished oil...

S Haved dumped oil into waste drum {dam} Was very light. Will run for a while & take a sample ?????

Bronze in the oil

L3130 Just changed front axel oil switched to 80-90 gear oil drained a little from both sides when changing motor oil for a look see {Struck gold} changed front axel oil at 1000hr serv. used udt 2 did not strike gold at that service time . Don't know what oil was in it then as I just got it. Had...

Nice old men handle. Was thinking about making one also. [ Because i am ]

New addition to the hunting party

I would drill new holes 180% from old & weld up old holes. [ the slop the better] my 2 cents