ejb11235's latest activity
-
ejb11235 replied to the thread How to limit fluid loss during BX23S hydraulic filter change.Fantastic! As I said previously, this is getting better and better, and you just made it better. -
ejb11235 reacted to whitetiger's post in the thread How to limit fluid loss during BX23S hydraulic filter change with
Like.
The HST filter on the BX series tractors is pressure-fed. Like others have told you, you will only lose less than a quart of fluid... -
ejb11235 replied to the thread How to limit fluid loss during BX23S hydraulic filter change.Perfect. I know how to move quickly!
-
ejb11235 reacted to 85Hokie's post in the thread How to limit fluid loss during BX23S hydraulic filter change with Like.
I think IF you are prepared and have the new filter handy ONCE under the machine - the amount of fluid you lose will be a red solo cup -...
-
ejb11235 replied to the thread How to limit fluid loss during BX23S hydraulic filter change.This is getting better and better! I think I'll tilt the tractor and just work quickly. I can't remember if you can even change the...
-
ejb11235 reacted to JimDeL's post in the thread How to limit fluid loss during BX23S hydraulic filter change with Like.
Changed mine about a week ago. Lost contents of the filter, and maybe half a pint more. Most of what I lost ran down my arm and...
-
ejb11235 replied to the thread How to limit fluid loss during BX23S hydraulic filter change.Thanks, this is helpful. I hadn't planned on completely changing out the fluid ... I replaced it at 50 hours, and the book doesn't call...
-
ejb11235 reacted to RCW's post in the thread How to limit fluid loss during BX23S hydraulic filter change with Like.
Don't take this as gospel. I usually change fluid and filter on my BX. If I recall correctly, when just changing filter, I only lost...
-
ejb11235 replied to the thread How to limit fluid loss during BX23S hydraulic filter change.Thanks! For some dumb-ass reason, I was thinking you had to put the vacuum over the screen filter opening ... I forgot about the fill...
-
ejb11235 reacted to rgriggs's post in the thread How to limit fluid loss during BX23S hydraulic filter change with Like.
I used the shop vac trick. Worked great on my mx5400. My son-in-law held it over the fill opening while I changed the filters.
-
ejb11235 posted the thread How to limit fluid loss during BX23S hydraulic filter change in Service, Repair & Maintenance.Hi folks ... my BX23S just went past 200 hours, so it's time to change the hydraulic filter. I'm wondering how much fluid loss I should...
-
The Wix filters likely will do the job but I'd stick with OEM. If anything I have learned over the years if it bolts or screws to the...