Recent content by dcarter

  1. D

    B7510 intermittent start problems

    I'm having the exact same problem with my L2501. Let us know if you find the cause. I'm going to remove the selenoid and do some voltage testing now, but I believe it's probably a bad relay. I'm not seeing much info on this relay online. I have the PDF shop manuals but it's really hard to...
  2. D

    L2501 vertical exhaust mod

    Funny, everyone has different views I guess. When I moved up from a B7100 to a L2501 a month or so ago, I was thrilled with the exhaust location and haven't noticed any black areas on the loader. I would be worried about tree branches hitting the vertical pipe, but nice fabrication.
  3. D

    L3800 Radiator elbow broke off!

    So how did this turn out? The same thing happened to me today on a L2501 I bought yesterday! It's a 2016 used, with only 15 hours on it, so I'm really bummed out about it. In my case the tree branch pushed the lower radiator hose into the fan and broke off the lower radiator connector just...
  4. D

    3 pt lift stopped working

    Just to close out this thread, what I discovered is that when the PTO lift doesn't work, all I have to do is jiggle the FEL control lever left and right and the PTO lift starts working. I'm not sure what's going on, but this works every time, so no reason to take anything apart.
  5. D

    3 pt lift stopped working

    Well turns out the problem is intermittent again. I did some more testing and found that the PTO lift was sometimes lifting very slowly, almost too slowly to notice, so I did some mowing and it actually started working full speed occasionally. For now, I'll try to use it as is and hope that it...
  6. D

    3 pt lift stopped working

    I have a B7100 HST with FEL and the 3 pt lift has always worked intermittantly since I got the tractor a few years ago, but I've never had much weight on it, mainly just a hitch basket. Recently I bought a brush hog and the lift quit working complete. FEL still works fine. I tried changing...
  7. D

    B2320 HST Pedal sticks

    Thanks for the reply. I spent some time over at tractorbynet and found a very helpful post with pics. Turns out I have a similar problem. I learned that the pedal is returned to neutral by a V shaped metal peice that has a spring tensioned bearing roller against it. The deepest part of the V...
  8. D

    B2320 HST Pedal sticks

    B7100HST sticking I'm a new owner of a 94 B7100HST with FEL and have the pedal sticking problem real bad. I'm just using the clutch a lot and basically driving it like it's not HST, but it would be nice to get it working right. I've read through this thread and I still don't understand what...