Dashman's latest activity
-
DDashman replied to the thread Non-functioning hydraulics.I finally had some time today to remove those washers I placed in the Pressure Relief Valve. I had to purchase a crowsfoot set with a...
-
D@Dashman I am glad you recalled that untightened plug! And don’t get too worried that we kept going to the hose connection that you...
-
DGreat news and interesting that the undertightend blanking plug was dumping inlet flow to tank. I will file that tidbit away for future...
-
DDashman replied to the thread Non-functioning hydraulics.First of all thank you to Russell, Dan, and Wolfman. Second, I gave you guys all the details of how I got into this issue. When I...
-
DDashman replied to the thread Non-functioning hydraulics.Eiiigh!!! 🤦♂️ I already determined that the outlet hose from the hydraulic block from the pump had a "good stream". I also installed...
-
DDashman replied to the thread Non-functioning hydraulics.I said, "I held the outlet hose into a bucket, and started the tractor. It made a pretty strong stream". ...and it also maxed out the...
-
DDashman replied to the thread Non-functioning hydraulics.Ok, I finally got enough fluid filtered through a cloth to fill the level to the sight glass. I routed a hose from the loader valve PB...
-
DDashman replied to the thread Non-functioning hydraulics.Dan, as I'm following you all's advice, I'm getting you want me to get pressure readings from the FEL valve PB and remote valve PB...
-
DDashman replied to the thread Non-functioning hydraulics.This particular HUSCO 9210 Loader control valve (LB552) does not have a pressure relief valve. It has a plug in the port where a PRV...
-
DDashman replied to the thread Non-functioning hydraulics.I used my air compressor with a rubber tip to put about 35 psi on the outlet hose from the hydraulic block. If it was somehow flowing...
-
DDashman replied to the thread Non-functioning hydraulics.In my photos: Red = outlet, pressure. 3/B, Hose 6, FEL inlet Green = inlet, Power Beyond. 1/C, Hose 5, FEL PB stock, Remote PB current...
-
-
DDashman replied to the thread Non-functioning hydraulics.I'm not seeing what you believe is incorrect. It seems that you've stated what I have in just a different manner than what I did. If I...
-
DDashman replied to the thread Non-functioning hydraulics.My fitting arrived today, and I affixed it to the end of the hose from the outlet of the hydraulic block (inlet of the loader valve)...
-
DDashman replied to the thread Non-functioning hydraulics.Discount Hydraulic Hose, that has been my go to hydraulic website, and their Thread ID Guide is helpful. For a few fittings, I don't...
-
DDashman replied to the thread Non-functioning hydraulics.1 to 3 day shipping on the gauge isn't the issue. It's the fitting to adapt the end of the hose to the gauge. I know, there's "kits"...
