Recent content by chevtoy

I wish it was that easy also. The filter I changed was the air filter on top of the transmission. This was the filter that was leaking in the first place before it was replaced. The loader will leak after being used from this air filter/breather until the level gets below the filter level and...

On this model it uses the same res tank for the transmission and rams. So according to the dealer he says he has seen this before when the seals go out on the transmission it will force oil into it and out the breather. This is what he thinks it is and will not know until they can diagnosis it...

Thanks for the input. I have spoken to several dealers and it appears the transmission seals might be blown out and allowing fluid in to transmission when the rams are operating which is causing the transmission to puck oil. Now just have to load it on trailer and get the check book out, I am...

My wife runs our nursery business and I usually only hear about things when there is a problem. So finally I am told last week that in about 3 months the loader has gone thru 10 gallons of oil. Luckily it does not look like the pump was hurt. What kills me is it took 10 gallons before she...

It is only leaking at operating temperature. The photo is the filter. I will unscrew it back out tomorrow and make sure where it screws in is not stopped up. I do know that when the old filter was off and the machine was cold nothing leaked out. Only after using the loader for while did it...

yes it is the correct fluid 10w-30 motor oil for hydraulic oil on this model which is weird but correct. yes it is at the correct level on the site glass.

Hello I am new to this forum and was hoping to get some help for my loader. I have a R520S loader that is leaking oil (motor oil for hydraulic oil on this particular Kubota)from the transmission filter. I purchased a new filter and put it on. Once i took the old one apart I had a feeling...